Your shopping cart is currently empty.
Little Giant Pump Company
-
Little Giant 558223 WE20G05P4-21 1/2 HP High Head Effluent PumpWE Series
Applications
- High head filter effluent
- Filtered effluent service
- Aeration
- Ornamental fountains
- Water fountains
- Franklin Electric submersible motor
- Heavy duty, 300 V, 10’ (3 m) SJOW motor stripped leads
- Removable built-in check valve
- Non-corrosive thermoplastic discharge and motor brackets
- Proven “PPO” staging allows close tolerances and increased performance
- High quality top bearing for maximum durability and years of reliable service
- Hex rubber bearing has extra-large surface for shaft stability and multiple flow channels for keeping particles away from bearing surfaces
- Stainless steel up thrust washer prevents excessive wear in service applications
- cCSAus listed
S
Featured Downloads
Price: $827.20 -
Little Giant 558226 WE (WE30G054P4-22) Series High Head Filtered Effluent PumpWE Series High Head Filtered Effluent Pump
Item Number: 558226
Model Number: WE30G05P4-22
The WE Series submersible high head filtered effluent pump is specifically engineered for filtered effluent service, aeration, and ornamental fountains / waterfalls
Features:
- 1/2 hp Franklin Electric submersible motor
- Heavy duty, 300 V, 10' (3 m) SJOW motor stripped leads
- 1-1/4" FNPT (31.7 mm) discharge
- Removable built-in check valve
- Non-corrosive thermoplastic discharge and motor brackets
- Proven Noryl® staging allows close tolerances and increased performance
- High quality top bearing for maximum durability and years of reliable service
- Hex rubber bearing has extra-large surface for shaft stability and multiple flow channels for keeping particles away from bearing surfaces
- Stainless steel upthrust washer prevents excessive wear in service applications
Price: $1,006.50 -
Little Giant 558255 LDGR1S05-CP End Suction Centrifugal Pump 115/230 V 1/2 HP ODP Motor (Replaces 558240)LGDR Series
LGDR Series close-coupled end suction centrifugal pumps offer ranges from sizes 0.5 to 2 HP. Its robust construction and design enable handling a wide array of applications such as intended for water circulation, booster service, liquid transfer, spraying systems, jockey pump and other general service pumping applications.
- Back pull-out design provides access to internal parts without disturbing the plumbing
- Robust cast iron volute standard
- Volute discharge can be rotated in 90° increments with top vertical standard from the factory
- Multiple 1/4” NPT drain/pressure ports enable winterizing no matter the volute orientation
-
Featured Downloads
Enclosed impeller design for increased efficiencies; thermoplastic and stainless steel options - Multiple mechanical seal construction materials to accommodate handling various fluids
- Every pump unit factory wet tested to insure customer satisfaction
- Suitable for horizontal or vertical (motor end up) installation
- NEMA standard motor options include:
- Rotation: right hand; clockwise when viewed from motor end
- Maximum fluid handling temperature 180 °F (82 °C)
Applications:
- Water circulation
- Booster service
- Liquid transfer
- Spraying systems
- Jockey pump service
- General purpose pumping
Price: $805.00 -
Little Giant 558256 LGDR1S07-CP End Suction Centrifugal Pump 115/230 V 3/4 HP ODP Motor (Replaces 558241)LGDR Series
LGDR Series close-coupled end suction centrifugal pumps offer ranges from sizes 0.5 to 2 HP. Its robust construction and design enable handling a wide array of applications such as intended for water circulation, booster service, liquid transfer, spraying systems, jockey pump and other general service pumping applications.
- Back pull-out design provides access to internal parts without disturbing the plumbing
- Robust cast iron volute standard
- Volute discharge can be rotated in 90° increments with top vertical standard from the factory
- Multiple 1/4” NPT drain/pressure ports enable winterizing no matter the volute orientation
-
Featured Downloads
Enclosed impeller design for increased efficiencies; thermoplastic and stainless steel options - Multiple mechanical seal construction materials to accommodate handling various fluids
- Every pump unit factory wet tested to insure customer satisfaction
- Suitable for horizontal or vertical (motor end up) installation
- NEMA standard motor options include:
- Rotation: right hand; clockwise when viewed from motor end
- Maximum fluid handling temperature 180 °F (82 °C)
Applications:
- Water circulation
- Booster service
- Liquid transfer
- Spraying systems
- Jockey pump service
- General purpose pumping
Price: $840.00 -
Little Giant 558257 LGDR1S1-CP End Suction Centrifugal Pump 115/230 V 1 HP ODP Motor (Replaces 558242)LGDR Series
LGDR Series close-coupled end suction centrifugal pumps offer ranges from sizes 0.5 to 2 HP. Its robust construction and design enable handling a wide array of applications such as intended for water circulation, booster service, liquid transfer, spraying systems, jockey pump and other general service pumping applications.
- Back pull-out design provides access to internal parts without disturbing the plumbing
- Robust cast iron volute standard
- Volute discharge can be rotated in 90° increments with top vertical standard from the factory
- Multiple 1/4” NPT drain/pressure ports enable winterizing no matter the volute orientation
- Enclosed impeller design for increased efficiencies; thermoplastic and stainless steel options
- Multiple mechanical seal construction materials to accommodate handling various fluids
- Every pump unit factory wet tested to insure customer satisfaction
- Suitable for horizontal or vertical (motor end up) installation
- NEMA standard motor options include:
- Rotation: right hand; clockwise when viewed from motor end
- Maximum fluid handling temperature 180 °F (82 °C)
Applications:
- Water circulation
- Booster service
- Liquid transfer
- Spraying systems
- Jockey pump service
- General purpose pumping
Featured Downloads
Price: $920.00 -
Little Giant 558258 LGDR2S1-CS End Suction Centrifugal Pump 115/230 V 1 HP ODP MotorLGDR Series
LGDR Series close-coupled end suction centrifugal pumps offer ranges from sizes 0.5 to 2 HP. Its robust construction and design enable handling a wide array of applications such as intended for water circulation, booster service, liquid transfer, spraying systems, jockey pump and other general service pumping applications.
- Back pull-out design provides access to internal parts without disturbing the plumbing
- Robust cast iron volute standard
- Volute discharge can be rotated in 90° increments with top vertical standard from the factory
- Multiple 1/4” NPT drain/pressure ports enable winterizing no matter the volute orientation
-
Featured Downloads
Enclosed impeller design for increased efficiencies; thermoplastic and stainless steel options - Multiple mechanical seal construction materials to accommodate handling various fluids
- Every pump unit factory wet tested to insure customer satisfaction
- Suitable for horizontal or vertical (motor end up) installation
- NEMA standard motor options include:
- Rotation: right hand; clockwise when viewed from motor end
- Maximum fluid handling temperature 180 °F (82 °C)
Applications:
- Water circulation
- Booster service
- Liquid transfer
- Spraying systems
- Jockey pump service
- General purpose pumping
Price: $1,022.00 -
Little Giant 558259 LDGR2S15-CS End Suction Centrifugal Pump 115/230 V 1.5 HP ODP Motor (Replaces 558243)LGDR Series
LGDR Series close-coupled end suction centrifugal pumps offer ranges from sizes 0.5 to 2 HP. Its robust construction and design enable handling a wide array of applications such as intended for water circulation, booster service, liquid transfer, spraying systems, jockey pump and other general service pumping applications.
- Back pull-out design provides access to internal parts without disturbing the plumbing
- Robust cast iron volute standard
- Volute discharge can be rotated in 90° increments with top vertical standard from the factory
- Multiple 1/4” NPT drain/pressure ports enable winterizing no matter the volute orientation
- Enclosed impeller design for increased efficiencies; thermoplastic and stainless steel options
- Multiple mechanical seal construction materials to accommodate handling various fluids
- Every pump unit factory wet tested to insure customer satisfaction
- Suitable for horizontal or vertical (motor end up) installation
- NEMA standard motor options include:
- Rotation: right hand; clockwise when viewed from motor end
- Maximum fluid handling temperature 180 °F (82 °C)
Applications:
- Water circulation
- Booster service
- Liquid transfer
- Spraying systems
- Jockey pump service
- General purpose pumping
Featured Downloads
Price: $1,100.00 -
Little Giant 558260 LDGR2S2 End Suction Centrifugal Pump 230 V 2 HP ODP Motor (Replaces 558244)LGDR Series
LGDR Series close-coupled end suction centrifugal pumps offer ranges from sizes 0.5 to 2 HP. Its robust construction and design enable handling a wide array of applications such as intended for water circulation, booster service, liquid transfer, spraying systems, jockey pump and other general service pumping applications.
- Back pull-out design provides access to internal parts without disturbing the plumbing
- Robust cast iron volute standard
- Volute discharge can be rotated in 90° increments with top vertical standard from the factory
- Multiple 1/4” NPT drain/pressure ports enable winterizing no matter the volute orientation
- Enclosed impeller design for increased efficiencies; thermoplastic and stainless steel options
- Multiple mechanical seal construction materials to accommodate handling various fluids
- Every pump unit factory wet tested to insure customer satisfaction
- Suitable for horizontal or vertical (motor end up) installation
- NEMA standard motor options include:
- Rotation: right hand; clockwise when viewed from motor end
- Maximum fluid handling temperature 180 °F (82 °C)
Applications:
- Water circulation
- Booster service
- Liquid transfer
- Spraying systems
- Jockey pump service
- General purpose pumping
Featured Downloads
Price: $1,455.00 -
Little Giant 558274 JP-050-C Shallow Well Jet Pump 1/2 HP Dual Voltage602002
Same as 91360005 WJS05CI 1/2hp Cast Iron Shallow Well Jet Pump
-
Featured Downloads
Price: $610.00 -
-
Little Giant 558275 JP-075-C Shallow Well Jet Pump 3/4 HP (Replacement pump for Monarch MJS-75)913600007 WJS07CI 3/4hp Cast Iron Shallow Well Jet Pump
602003
-
Featured Downloads
Price: $675.00 -
-
Little Giant 558276 JP-100-C Shallow Well Jet Pump 1 HP Dual Voltage602004
Same as 91360010 WJS1CI 1hp Cast Iron Shallow Well Jet Pump
Price: $850.00 -
-
Little Giant 558281 JPC-050- C Convertible Jet Pump Dual Voltage 115/230Same as 91370005 WJC05CI-C Cast Iron Convertible Jet Pump
602032
Featured Downloads
Price: $720.00 -
Little Giant 558282 JPC-075-C Convertible Jet Pump Dual Voltage 115/230602033
Same as 91370007 WJC07CI-C 3/4hp Cast Iron Convertible Jet Pump
-
Spec Sheets
Manuals
Price: $756.00 -
-
Little Giant 558283 JPC-100-C Convertible Jet Pump Dual Voltage 115/230Same as 91370010 WJC1CI-C 1hp Cast Iron Convertible Jet Pump
602034
-
Spec Sheets
Manuals
Price: $850.00 -
-
Little Giant 558294 LSP-100-C Lawn Sprinkler Pump 1 HP614662-
Applications
- For both residential and commercial lawn and turf sprinkler systems, irrigation, gardens, and general water transfer
- Self priming
- Cast iron casing and seal plate for durability and long life
- Single-phase capacitor start, 115/230 dual voltage on 3/4 hp, 1 hp and 1-1/2 hp models. Higher than standard NEMA service factors (230 V on 2 hp model)
- Standard 5/8" rotating mechanical seal, for a reliable seal against water leakage
- ing plug to facilitate priming
- Drain plug for easy drainage of pump
- Fully serviceable with two-year warranty
- 2 hp model uses a brass impeller
-
Featured Downloads
Catalogs
Title Type Size Water Systems Product Catalog
Price: $850.00 -
-
Little Giant 558295 LSP-150-C, 1-1/2 HP, 115/230 Volt Lawn Sprinkler Pump-
614663
- 2" NPT (51 mm) suction, 1-1/2" NPT (38 mm) discharge
-
Applications
- For both residential and commercial lawn and turf sprinkler systems, irrigation, gardens, and general water transfer
- Self priming
- Cast iron casing and seal plate for durability and long life
- Single-phase capacitor start, 115/230 dual voltage on 3/4 hp, 1 hp and 1-1/2 hp models. Higher than standard NEMA service factors (230 V on 2 hp model)
- Standard 5/8" rotating mechanical seal, for a reliable seal against water leakage
- ing plug to facilitate priming
- Drain plug for easy drainage of pump
- Fully serviceable with two-year warranty
- 2 hp model uses a brass impeller
Price: $862.00 -
614663
-
Little Giant 558296 LSP-200-C Lawn Sprinkler Pump 2 HP 230 volt only on 2 HP- 614664
-
Applications
- For both residential and commercial lawn and turf sprinkler systems, irrigation, gardens, and general water transfer
- Self priming
- Cast iron casing and seal plate for durability and long life
- Single-phase capacitor start, 115/230 dual voltage on 3/4 hp, 1 hp and 1-1/2 hp models. Higher than standard NEMA service factors (230 V on 2 hp model)
- Standard 5/8" rotating mechanical seal, for a reliable seal against water leakage
- Priming plug to facilitate priming
- Drain plug for easy drainage of pump
- Fully serviceable with two-year warranty
- 2 hp model uses a brass impeller
Price: $1,076.00 - 614664
-
Little Giant 558298 LSPH-200-C Lawn Sprinkler Pump, 2 HP 230 VoltApplications
- For both residential and commercial lawn and turf sprinkler systems, irrigation, gardens, and general water transfer
- Self priming
- Cast iron casing and seal plate for durability and long life
- Single-phase capacitor start, 115/230 dual voltage on 3/4 hp, 1 hp and 1-1/2 hp models.
- Higher than standard NEMA service factors (230 V on 2 hp model)Standard 5/8" rotating mechanical seal, for a reliable seal against water leakage
- 2" NPT (51 mm) suction, 1-1/2" NPT (38 mm) discharge
- Priming plug to facilitate priming
- Drain plug for easy drainage of pump
- Fully serviceable with two-year warranty
- 2 hp model uses a brass impeller
-
Featured Downloads
Catalogs
Title Type Size Water Systems Product Catalog
Price: $1,079.00 -
Little Giant 560040 MCT-5P Machine Tool Coolant Tank
Machine Coolant Tank MCT-5P
Item Number: 560040
Model Number: MCT-5P
For use on single-spindle drill presses, bench mills, tool grinders, single-spindle tapping machines, cut off saws, small lathes using water soluble or light cutting oil. Includes all adapters and fittings for use with recommended pumps.
Features:
- 5 gallon polyethylene tank
- Metal chip collector basket
- Baffle
- 6' plastic hose
- Plastic flex nozzle with brass control valve
- NOTE: This unit does not include pump
PARTS LIST FOR MCT-5
PART NO PART DESCRIPTION
1 160115 Tank (5 Gal. Plastic)
2 160114 Cover, Tank
3 160206 Screen, Chip
4 160116 Baffle, 4-3/8 X 9-3/4"
5 160413 Flex Plastic Nozzle -12"
6 949003 Reducer, 3/8" NPT X 1/4" NPT
7 940010 Valve, Metal Hose 3/8"
8 941041 Adapter, 1/2" X 3/8" NPT
9 944202 Tubing, 1/2" X 6' Vinyl
10 941004 Adapter, (Not Shown)
Price: $497.20 -
Little Giant 560300 MCT-10 Machine Tool Coolant Tank
Machine Coolant Tank MCT-10
Item Number: 560300
Model Number: MCT-10
For us with medium size lathes, grinders, cut off machines, milling and drilling machines using water soluble or light cutting oil. Includes all adapters and fittings for use with recommended pumps.
Features:
- 10 gallon metal tank w/ baffle
- 4" neoprene hose w/ brass nuts
- Plastic flex nozzle and brass control valve
- Removable chip collector tray and splash deflector
- NOTE: This unit does not include pump
Featured Downloads
Price: $1,298.00