Your shopping cart is currently empty.
Little Giant Pump Company
-
Price: $60.50 -
Price: $104.50 -
Little Giant 555713 IRK-360S Impeller Kit Has Stainless Steel Inserts Molded into Impeller(For use with Stainles Steel Pump)
Kit includes Impellers with Stainless Steel Inserts
Impeller / Gasket kit for 360 Pump Impeller replacement kit for the 360 series self-priming transfer pumps. Kit includes two Buna-N impellers and volute cover gaskets. IMPELLER INCLUDES STAINLESS STEEL INSERTS
O&M Manual Price: $62.70 -
Little Giant 555714 SRK-360S Impeller kit w/shaft seal (Replaces 555707)
Kit includes (2) Nitrile cover gaskets (2) Impeller, Buna-N w/SST insert (1) U-cup seal,Viton
(1) Felt Washer (1) Internal retaining Ring (1) Slinger washer,neoprenePrice: $79.20 -
Little Giant 558221 WE10G05P4-21 10 Gal 1/2 HP Effluent PumpWE Series
Applications
- High head filter effluent
- Filtered effluent service
- Aeration
- Ornamental fountains
- Water Fountains
- Franklin Electric submersible motor
- Heavy duty, 300 V, 10’ (3 m) SJOW motor stripped leads
- Removable built-in check valve
- Non-corrosive thermoplastic discharge and motor brackets
- Proven “PPO” staging allows close tolerances and increased performance
- High quality top bearing for maximum durability and years of reliable service
- Hex rubber bearing has extra-large surface for shaft stability and multiple flow channels for keeping particles away from bearing surfaces
- Stainless steel up thrust washer prevents excessive wear in service applications
- cCSAus listed
Featured Downloads
Price: $788.70 -
Little Giant 558223 WE20G05P4-21 1/2 HP High Head Effluent PumpWE Series
Applications
- High head filter effluent
- Filtered effluent service
- Aeration
- Ornamental fountains
- Water fountains
- Franklin Electric submersible motor
- Heavy duty, 300 V, 10’ (3 m) SJOW motor stripped leads
- Removable built-in check valve
- Non-corrosive thermoplastic discharge and motor brackets
- Proven “PPO” staging allows close tolerances and increased performance
- High quality top bearing for maximum durability and years of reliable service
- Hex rubber bearing has extra-large surface for shaft stability and multiple flow channels for keeping particles away from bearing surfaces
- Stainless steel up thrust washer prevents excessive wear in service applications
- cCSAus listed
S
Featured Downloads
Price: $827.20 -
Little Giant 558226 WE (WE30G054P4-22) Series High Head Filtered Effluent PumpWE Series High Head Filtered Effluent Pump
Item Number: 558226
Model Number: WE30G05P4-22
The WE Series submersible high head filtered effluent pump is specifically engineered for filtered effluent service, aeration, and ornamental fountains / waterfalls
Features:
- 1/2 hp Franklin Electric submersible motor
- Heavy duty, 300 V, 10' (3 m) SJOW motor stripped leads
- 1-1/4" FNPT (31.7 mm) discharge
- Removable built-in check valve
- Non-corrosive thermoplastic discharge and motor brackets
- Proven Noryl® staging allows close tolerances and increased performance
- High quality top bearing for maximum durability and years of reliable service
- Hex rubber bearing has extra-large surface for shaft stability and multiple flow channels for keeping particles away from bearing surfaces
- Stainless steel upthrust washer prevents excessive wear in service applications
Price: $1,006.50 -
Little Giant 558255 LDGR1S05-CP End Suction Centrifugal Pump 115/230 V 1/2 HP ODP Motor (Replaces 558240)LGDR Series
LGDR Series close-coupled end suction centrifugal pumps offer ranges from sizes 0.5 to 2 HP. Its robust construction and design enable handling a wide array of applications such as intended for water circulation, booster service, liquid transfer, spraying systems, jockey pump and other general service pumping applications.
- Back pull-out design provides access to internal parts without disturbing the plumbing
- Robust cast iron volute standard
- Volute discharge can be rotated in 90° increments with top vertical standard from the factory
- Multiple 1/4” NPT drain/pressure ports enable winterizing no matter the volute orientation
-
Featured Downloads
Enclosed impeller design for increased efficiencies; thermoplastic and stainless steel options - Multiple mechanical seal construction materials to accommodate handling various fluids
- Every pump unit factory wet tested to insure customer satisfaction
- Suitable for horizontal or vertical (motor end up) installation
- NEMA standard motor options include:
- Rotation: right hand; clockwise when viewed from motor end
- Maximum fluid handling temperature 180 °F (82 °C)
Applications:
- Water circulation
- Booster service
- Liquid transfer
- Spraying systems
- Jockey pump service
- General purpose pumping
Price: $805.00 -
Little Giant 558256 LGDR1S07-CP End Suction Centrifugal Pump 115/230 V 3/4 HP ODP Motor (Replaces 558241)LGDR Series
LGDR Series close-coupled end suction centrifugal pumps offer ranges from sizes 0.5 to 2 HP. Its robust construction and design enable handling a wide array of applications such as intended for water circulation, booster service, liquid transfer, spraying systems, jockey pump and other general service pumping applications.
- Back pull-out design provides access to internal parts without disturbing the plumbing
- Robust cast iron volute standard
- Volute discharge can be rotated in 90° increments with top vertical standard from the factory
- Multiple 1/4” NPT drain/pressure ports enable winterizing no matter the volute orientation
-
Featured Downloads
Enclosed impeller design for increased efficiencies; thermoplastic and stainless steel options - Multiple mechanical seal construction materials to accommodate handling various fluids
- Every pump unit factory wet tested to insure customer satisfaction
- Suitable for horizontal or vertical (motor end up) installation
- NEMA standard motor options include:
- Rotation: right hand; clockwise when viewed from motor end
- Maximum fluid handling temperature 180 °F (82 °C)
Applications:
- Water circulation
- Booster service
- Liquid transfer
- Spraying systems
- Jockey pump service
- General purpose pumping
Price: $840.00 -
Little Giant 558257 LGDR1S1-CP End Suction Centrifugal Pump 115/230 V 1 HP ODP Motor (Replaces 558242)LGDR Series
LGDR Series close-coupled end suction centrifugal pumps offer ranges from sizes 0.5 to 2 HP. Its robust construction and design enable handling a wide array of applications such as intended for water circulation, booster service, liquid transfer, spraying systems, jockey pump and other general service pumping applications.
- Back pull-out design provides access to internal parts without disturbing the plumbing
- Robust cast iron volute standard
- Volute discharge can be rotated in 90° increments with top vertical standard from the factory
- Multiple 1/4” NPT drain/pressure ports enable winterizing no matter the volute orientation
- Enclosed impeller design for increased efficiencies; thermoplastic and stainless steel options
- Multiple mechanical seal construction materials to accommodate handling various fluids
- Every pump unit factory wet tested to insure customer satisfaction
- Suitable for horizontal or vertical (motor end up) installation
- NEMA standard motor options include:
- Rotation: right hand; clockwise when viewed from motor end
- Maximum fluid handling temperature 180 °F (82 °C)
Applications:
- Water circulation
- Booster service
- Liquid transfer
- Spraying systems
- Jockey pump service
- General purpose pumping
Featured Downloads
Price: $920.00 -
Little Giant 558258 LGDR2S1-CS End Suction Centrifugal Pump 115/230 V 1 HP ODP MotorLGDR Series
LGDR Series close-coupled end suction centrifugal pumps offer ranges from sizes 0.5 to 2 HP. Its robust construction and design enable handling a wide array of applications such as intended for water circulation, booster service, liquid transfer, spraying systems, jockey pump and other general service pumping applications.
- Back pull-out design provides access to internal parts without disturbing the plumbing
- Robust cast iron volute standard
- Volute discharge can be rotated in 90° increments with top vertical standard from the factory
- Multiple 1/4” NPT drain/pressure ports enable winterizing no matter the volute orientation
-
Featured Downloads
Enclosed impeller design for increased efficiencies; thermoplastic and stainless steel options - Multiple mechanical seal construction materials to accommodate handling various fluids
- Every pump unit factory wet tested to insure customer satisfaction
- Suitable for horizontal or vertical (motor end up) installation
- NEMA standard motor options include:
- Rotation: right hand; clockwise when viewed from motor end
- Maximum fluid handling temperature 180 °F (82 °C)
Applications:
- Water circulation
- Booster service
- Liquid transfer
- Spraying systems
- Jockey pump service
- General purpose pumping
Price: $1,022.00 -
Little Giant 558259 LDGR2S15-CS End Suction Centrifugal Pump 115/230 V 1.5 HP ODP Motor (Replaces 558243)LGDR Series
LGDR Series close-coupled end suction centrifugal pumps offer ranges from sizes 0.5 to 2 HP. Its robust construction and design enable handling a wide array of applications such as intended for water circulation, booster service, liquid transfer, spraying systems, jockey pump and other general service pumping applications.
- Back pull-out design provides access to internal parts without disturbing the plumbing
- Robust cast iron volute standard
- Volute discharge can be rotated in 90° increments with top vertical standard from the factory
- Multiple 1/4” NPT drain/pressure ports enable winterizing no matter the volute orientation
- Enclosed impeller design for increased efficiencies; thermoplastic and stainless steel options
- Multiple mechanical seal construction materials to accommodate handling various fluids
- Every pump unit factory wet tested to insure customer satisfaction
- Suitable for horizontal or vertical (motor end up) installation
- NEMA standard motor options include:
- Rotation: right hand; clockwise when viewed from motor end
- Maximum fluid handling temperature 180 °F (82 °C)
Applications:
- Water circulation
- Booster service
- Liquid transfer
- Spraying systems
- Jockey pump service
- General purpose pumping
Featured Downloads
Price: $1,100.00 -
Little Giant 558260 LDGR2S2 End Suction Centrifugal Pump 230 V 2 HP ODP Motor (Replaces 558244)LGDR Series
LGDR Series close-coupled end suction centrifugal pumps offer ranges from sizes 0.5 to 2 HP. Its robust construction and design enable handling a wide array of applications such as intended for water circulation, booster service, liquid transfer, spraying systems, jockey pump and other general service pumping applications.
- Back pull-out design provides access to internal parts without disturbing the plumbing
- Robust cast iron volute standard
- Volute discharge can be rotated in 90° increments with top vertical standard from the factory
- Multiple 1/4” NPT drain/pressure ports enable winterizing no matter the volute orientation
- Enclosed impeller design for increased efficiencies; thermoplastic and stainless steel options
- Multiple mechanical seal construction materials to accommodate handling various fluids
- Every pump unit factory wet tested to insure customer satisfaction
- Suitable for horizontal or vertical (motor end up) installation
- NEMA standard motor options include:
- Rotation: right hand; clockwise when viewed from motor end
- Maximum fluid handling temperature 180 °F (82 °C)
Applications:
- Water circulation
- Booster service
- Liquid transfer
- Spraying systems
- Jockey pump service
- General purpose pumping
Featured Downloads
Price: $1,455.00 -
Little Giant 558274 JP-050-C Shallow Well Jet Pump 1/2 HP Dual Voltage602002
Same as 91360005 WJS05CI 1/2hp Cast Iron Shallow Well Jet Pump
-
Featured Downloads
Price: $610.00 -
-
Little Giant 558275 JP-075-C Shallow Well Jet Pump 3/4 HP (Replacement pump for Monarch MJS-75)913600007 WJS07CI 3/4hp Cast Iron Shallow Well Jet Pump
602003
-
Featured Downloads
Price: $675.00 -
-
Little Giant 558276 JP-100-C Shallow Well Jet Pump 1 HP Dual Voltage602004
Same as 91360010 WJS1CI 1hp Cast Iron Shallow Well Jet Pump
Price: $850.00 -
-
Little Giant 558281 JPC-050- C Convertible Jet Pump Dual Voltage 115/230Same as 91370005 WJC05CI-C Cast Iron Convertible Jet Pump
602032
Featured Downloads
Price: $720.00 -
Little Giant 558282 JPC-075-C Convertible Jet Pump Dual Voltage 115/230602033
Same as 91370007 WJC07CI-C 3/4hp Cast Iron Convertible Jet Pump
-
Spec Sheets
Manuals
Price: $756.00 -
-
Little Giant 558283 JPC-100-C Convertible Jet Pump Dual Voltage 115/230Same as 91370010 WJC1CI-C 1hp Cast Iron Convertible Jet Pump
602034
-
Spec Sheets
Manuals
Price: $850.00 -
-
Little Giant 558294 LSP-100-C Lawn Sprinkler Pump 1 HP614662-
Applications
- For both residential and commercial lawn and turf sprinkler systems, irrigation, gardens, and general water transfer
- Self priming
- Cast iron casing and seal plate for durability and long life
- Single-phase capacitor start, 115/230 dual voltage on 3/4 hp, 1 hp and 1-1/2 hp models. Higher than standard NEMA service factors (230 V on 2 hp model)
- Standard 5/8" rotating mechanical seal, for a reliable seal against water leakage
- ing plug to facilitate priming
- Drain plug for easy drainage of pump
- Fully serviceable with two-year warranty
- 2 hp model uses a brass impeller
-
Featured Downloads
Catalogs
Title Type Size Water Systems Product Catalog
Price: $850.00 -